
Original: $54,990.00
-70%$54,990.00
$16,497.00The Story
The Eris E8 XT is a substantial update to a lauded classic. Deeper lows and a wider, more controlled sweet spot (thanks to its new EBM wave guide design) mean that our best-selling studio monitors just got even better.
Studio speakers with a wide sweet spot.

A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. Itâs ideal for group listening and collaborationâwhile narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Lows that go lower.

The familiar woven composite low-frequency driver still offers Eris' signature tight, clear bass; plenty of punch and no flub. Eris E5 XT studio monitors sport a ported enclosure that is larger than that of their predecessors, allowing them to reach down to an astonishing 48 Hz. That's 10 Hz below previous modelsâwith no subwoofer required!
Set up your studio monitors for your room.
Acoustic tuning controls allow you to configure the Eris E5 XT perfectly for your roomâyou get Low-cut, Mid, and High controls, as well as 3-way acoustic space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.Features:
Components and construction
- 8-inch woven composite low-frequency transducer
- 1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 105 dB maximum continuous SPL
- HF Adjust (±6 dB, continuously variable)
- Midrange Adjust (±6 dB, continuously variable)
- Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
- Highpass filter (Off, 80 Hz, 100 Hz)
Power and safety
- 130 watt, Class AB biamplification
- RF interference, output current limiting, over-temperature, transient, and subsonic protection
- Amplifier âsoft startâ feature eliminates popping on power-up
- Internal power supply with IEC connector
- Power switch with on/off LED
Inputs and outputs
- Balanced XLR/Œ-inch
- Unbalanced RCA inputs (E5/E8)
Specifications:
Inputs
- 1- Balanced XLR
- 1- Balanced ÂŒâ TRS
- 1- Unbalanced RCA
- Frequency Response : 35 Hz - 20 kHz
- Crossover Frequency : 2.2 kHz
- LF Amplifier Power : 75W
- HF Amplifier Power : 65W
- Peak SPL (@ 1 meter) : 105 dB
- LF Driver : 8â reinforced woofer
- HF Driver : 1.25â silk dome tweeter
- Input Impedance : 10 kΩ
- Dispersion : 100 degrees horizontal by 60 degrees vertical
- Volume Range : A-type taper
- MF Control : -6, 0, +6 dB
- HF Control : -6, 0, +6 dB
- Low Cut : Flat, 80 Hz, 100 Hz
- Acoustic Space : Flat, -2 dB, -4 dB
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
- 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
- Vinyl-laminated, medium-density fiberboard
- Width : 9.75â (247.65 mm)
- Depth : 11.5â (292.1 mm)
- Height : 16â (406.4 mm)
- Weight : 23 lbs (10.43 kg)
Made in China

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
The Eris E8 XT is a substantial update to a lauded classic. Deeper lows and a wider, more controlled sweet spot (thanks to its new EBM wave guide design) mean that our best-selling studio monitors just got even better.
Studio speakers with a wide sweet spot.

A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. Itâs ideal for group listening and collaborationâwhile narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Lows that go lower.

The familiar woven composite low-frequency driver still offers Eris' signature tight, clear bass; plenty of punch and no flub. Eris E5 XT studio monitors sport a ported enclosure that is larger than that of their predecessors, allowing them to reach down to an astonishing 48 Hz. That's 10 Hz below previous modelsâwith no subwoofer required!
Set up your studio monitors for your room.
Acoustic tuning controls allow you to configure the Eris E5 XT perfectly for your roomâyou get Low-cut, Mid, and High controls, as well as 3-way acoustic space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.Features:
Components and construction
- 8-inch woven composite low-frequency transducer
- 1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 105 dB maximum continuous SPL
- HF Adjust (±6 dB, continuously variable)
- Midrange Adjust (±6 dB, continuously variable)
- Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
- Highpass filter (Off, 80 Hz, 100 Hz)
Power and safety
- 130 watt, Class AB biamplification
- RF interference, output current limiting, over-temperature, transient, and subsonic protection
- Amplifier âsoft startâ feature eliminates popping on power-up
- Internal power supply with IEC connector
- Power switch with on/off LED
Inputs and outputs
- Balanced XLR/Œ-inch
- Unbalanced RCA inputs (E5/E8)
Specifications:
Inputs
- 1- Balanced XLR
- 1- Balanced ÂŒâ TRS
- 1- Unbalanced RCA
- Frequency Response : 35 Hz - 20 kHz
- Crossover Frequency : 2.2 kHz
- LF Amplifier Power : 75W
- HF Amplifier Power : 65W
- Peak SPL (@ 1 meter) : 105 dB
- LF Driver : 8â reinforced woofer
- HF Driver : 1.25â silk dome tweeter
- Input Impedance : 10 kΩ
- Dispersion : 100 degrees horizontal by 60 degrees vertical
- Volume Range : A-type taper
- MF Control : -6, 0, +6 dB
- HF Control : -6, 0, +6 dB
- Low Cut : Flat, 80 Hz, 100 Hz
- Acoustic Space : Flat, -2 dB, -4 dB
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
- 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
- Vinyl-laminated, medium-density fiberboard
- Width : 9.75â (247.65 mm)
- Depth : 11.5â (292.1 mm)
- Height : 16â (406.4 mm)
- Weight : 23 lbs (10.43 kg)
Made in China


















